First-time setup of your device
Switching o n the device for the first time
Switchingonforthefirst time
When you switch o n the device for the first time, the supplied software is
installed and configure d. B ecause this procedure must not be interrupted,
you should set aside eno ugh time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, D O NOT restart the device unless
you are requested to do so!
To make it easier to use yo
ur device for the first time, the operating system
is pre-installed on the
hard disk.
► Switch on your device.
► D uring installation, follow th e instructions on screen.
If a Windows operating system is installed on yo ur device, you will find more
information on the system and drivers, help pro grammes, updates, manuals etc.
on the device or on the Internet at "
http://ts.fujitsu.com/support".
16 Fujitsu Tech nology Solutions
To Next Page
Loading...
