26
- Keyboard
[Fn+F10]
Pressing the [Fn] + [F10] keys allows you to change your selection of where to send your display video.
Note: DisplayPort and DVI are mutually exclusive. DisplayPort has priority over DVI. If you have monitors
connected to DisplayPort and DVI at same time, Fn+F10 will not enable DVI monitor.
• If you have external display connected to all ports (on system and port replicator, the following will
happen upon pressing [Fn]+[F10]: LCD -> VGA -> LCD+VGA (dual clone) -> DisplayPort (or DVI) ->
LCD+DisplayPort (or DVI) (dual clone) -> HDMI -> LCD+HDMI (dual clone) -> Repeat the loop ->
• If you only have an external CRT connected, the order is internal -> external CRT -> simultaneous
display > internal display.
• If you only have an HDMI device connected, the order is: internal display -> HDMI display ->
simultaneous display -> internal display.
Icon Keys Description
To Next Page
Loading...
