Fujitsu LifeBook U9313X - Assigning BIOS Passwords; Changing BIOS Passwords

Security functions
Assigning the supervisor and user passwords
► Start the BIOS Setu p Utility and go to the Security menu.
► Select the Set Supervisor Passw ord field and press the Enter key.

With Enter new Password: you are asked to enter a password.
► Enter the password and press the Enter key.

Confirm new Password requires you to confirm the password.
► Enter the password aga in and press the Enter key.

Changes have b een saved is a confirmation that the new password has been saved.
► To set the user password, select Set User Password and procee d exactly as
when configuring the supervisor password.

If you do not want to change any other settings, you can exit BIOS Setup Utility.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
PasswordSupervisorpasswor
d
Userpassword

The notebook is then reboote d and the new passw ord comes into effect. It will no w be nece ssary
to first enter your supervisor or user password in order to open the BIOS Setup Utility. Please
note that the user password only provides access to a few of the BIOS settings.
Changing the supervisor or user password
You can only change the supervisor password when you have logged into the
BIOS Se tup Utility with the supervisor password.
PasswordSupervisorpasswordUserpassword
► Call the BIOS Setup Utility and g o to the Security menu.
► When changing the password, proceed exactly as for password assignment.
Removing passwords
To remove a password (without setting a new password) perform the following steps:
PasswordSupervisor
password
Userpasswo
rd
► Start the BIOS Setu p Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and press the Enter key.

You will be requested to ente r the current password by the Enter Current Password prompt.
Yo u will be requested to enter a new password by the Enter New Password pro m pt.
► Press the Enter key twice.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.

The notebook will n ow reboot with the password rem ove d.
Removing the supervisor passw ord simultaneously deactivates the user password.
Fujitsu 63