Fujitsu LIFEBOOK U937 - F-Lock Setting

Working with t he notebook
Function keys
The symbols be low the keys represent fu nction keys.
They are numbered from
F1
to
F12
.
The function keys are used to activate functions of the operating system or applications directly.
Regardless of the F-Lock setting, the function keys are the primary key function:
• until Windows is loaded (after a system rebo ot).
The F-Lock setting, which was last active before the system reboots, then
reappears (see chapter "
F-Lock settin g", Page 2 7).
• with BIOS access during the POST phase: When during boot-up
Fn
+
F2
or
Fn
+
F12
are pressed, the BIOS menu is not called up. Here the
F2
or
F12
key must be pressed without a n additional key.
F-Lock setting
With the
FLock
key you can s
et either the hotkeys or the function keys as
the primary functi
on for th e upper key row.
F Lock is disabled b
y d efault in the delivery state.
► By pressing
Fn
+
Esc
F-Lo
ck is switched on and off.

When F-Lock is sw itched on, it is a ctivated like the
Caps Lock key
.
When changing t
he F-Lock setting, the primary and secondary key functions change as follows:
Status Hot key Function key
F-Lock is switched off (F-Lock
symbol not illuminated)
The hot keys become the
primary function:
► They are used by simply
pressing the h ot key.
The function keys become the
secondary function:
► They are used by pressing
Fn
+ Function key.
F-Lock is swi
tched on (F-Lock
symbol illu
minated)
The hot keys become the
secondary function:
► They are used by pressing
Fn
+ hot key.
The function
keys become the
primary fun
ction:
► They can us
ed by simply
pressing t
he Function Key.
Fujitsu 27