Settings in BIOS Setup Utility
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSetupUtilityConfiguration,BIOSSetupUtilitySetupConfiguring systemConfiguringhardware
The BIOS Setup Utility allow s you to set the system fu nctions and the hardware
configuration for the n otebook.
When it is delivered, the notebook is set to factory default settings. You can
change these settings in BIOS Setup Utility. Any changes you make take effect as
soon as you save and exit the BIOS Setup Utility.
The BIOS Setup Utility program contains the following m enus:
Info
Displays information relating to the BIOS, processor and notebook
System
Set calendar, clock, configure SATA d rive
Advanced
Configuration of v arious hardware components, such as mouse, keyboard,
processor
Security
Password settings and security functions
Boot
Configuration of the start-up sequence
Exit
Exits the BIOS S etup Utility
Starting the BIO
S Setup Utility
► Reboot the device (switch off/on or reboot the operating system).
BIOSSetupUtility
Depending on the setting for Fast Boot in the BIOS-S etu p- U tility, the following
notification may appear on the screen during start-up:
<F2> BIOS Setup <F12> Boot Menu
► While holding down the function key, press the function key
F2
.
► If a password has been assigned, enter the password and pre ss the Enter key.
If you have forgotten the passw ord, contact your system administrator
or contact our customer service center.
The BIOS Setup Utility starts.
56 Fujitsu
To Next Page
Loading...
