Technical data
Power adapter
Technicaldata
Electrical data
Primary 65 W
Rated voltage
100 V to 240 V (automatic)
Rated frequency 50 Hz to 60 Hz (automatic)
Secondary
Rated voltage 19 V
Max. rat ed current 3.42 A
An additional AC adapt
er or AC cable can be ordered at any time.
WLAN specifications
Type of network Intel® Dual Band W ireless-AC 8265
11a/b/g/n/11ac), Wi-Fi based*
Transfer rate (Automatic switching) IEEE802. 11 a and g: 54
Mbps max. data rate; IEEE802.11n: 300 Mbps
max. data rate, IEEE802.11ac: 867 Mbps max.
data rate
Active frequency • 802.11n: 2.4 GHz or 5 GHz
• 802.11b/g: 2400~2473 MHz
• 802.11a: 4900~5850 MHz
• 802.11a: 2.4 GHz / 5 GHz
Typical operating distances** • 802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft.
(91m)@6Mbps
• 802.11ac: 40 ft. (12 m) @ 54 Mbps; 300
ft.(91 m) @ 6 Mbps
• 802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft.
(91m)@1Mbps
• 802.11g: 100 ft. (30 m ) @ 54 Mbps; 300 ft.
(91m)@1Mbps
• 802.11n: Estimated double the operating
distance of 802.11g and 802.11a in their
respective frequencies
Number
of channels
• 802.11a: 8 independent channels
• 802.11b/g: 11 channe ls, 3 non-overlapping
channels
• 802.11n: Channel bonding takes two of
the non-overlapping 20MHz channels and
combines it into one 40MHz channel. It is
actually 12 non-overlapping chann els with
channel bonding and 24 without. Also it is 1
non-overlapping c hann el in 2.4GHz when
channel bonding is used.
• 802.11ac: 5 independent channels
Fujitsu 67
To Next Page
Loading...
