Connecting external devices
Connecting an external monitor to the port replicator
An analogue monitor is connected to the analogue VGA monitor port, a digital monitor to the
DisplayPort on the optional Port Replicator. Screen output is limited to a maximum of two screens at
any one time (see "
Function keys and key combinations", Page 24, section "Toggle screen output").
MonitorVGAconnec tionsocketMonito rportMonitorport
Analogue VGA monitor port (on optional port
replicator)
Digital DisplayPort (on optional Port Replicator)
► Switchoffthenot
ebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on
the external monitor and then the notebook.
You can also swi
tch between the external monitor and the LCD monitor of the
notebook, see
chapter "
Function keys and key combinations", Page 24.
You can displa
y the same picture on the external monitor and the
notebook LCD m
onitor simultaneously.
Fujitsu 51
To Next Page
Loading...
