First-time setup of yo ur device
Choosealocation
Choosealoc ationSetupACadapter
Choose a suitable location for the device before setting it up. In doing
so, please follow these instructions:
• Never place the device or the AC adapter on a heat-sensitive surface.
The surface could be damaged as a resu lt.
• Never p lace the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). T his can block the air vents and cau se overheating and damage.
• The underside of the device heats up d uring normal operation. Prolonged contact
with the skin can become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of th e device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm / 3.94 inches away from the device
and its AC adapter to ensure adequate ventilation.
• Never cover the ventilation openings of the device.
• Do not expose the device to extreme environmental conditions.
Protect th e device against dust, humidity and hea t.
Connecting the A C adapter
MakingreadytouseACadapter
Please follow the safety instructions in the section "Important notes" , Page 13.
The s upplied AC cable conforms to the requirements of the country in which
you purchased your device. Make sure that the AC cable is approved for
use in the country in which y ou intend to use it.
2
1
3
► Connect the AC cable (1) to the AC
adapter provided for use with the devic
e,
see chapter "Technical data", Page 69.
►
►
Connect the AC adapter cable (2) to the
DC jack (DC IN) of the dev
ice.
Plug the AC cable (3) into a power outlet.
Fujitsu 19
DC IN
To Next Page
Loading...
