25
Problem
Shutdown and Startup Problems
Video Problems
Your notebook
appears to change
setup parameters
when you start it.
The built-in
display is blank
when you turn
on your LifeBook
notebook.
(continued)
Your system
display won’t
turn on when the
system is turned
on or when the
system has
resumed.
BIOS setup changes
were not saved when you
made them and exited
the BIOS
setup utility returning it to
pevious settings.
Something is pushing on
the Closed Cover switch.
The system may be
password-protected.
The BIOS CMOS hold-up
battery has failed.
Make sure you select Save Changes And Exit
when exiting the BIOS setup utility.
Clear the Closed Cover switch.
Check the status indicator panel to verify that
the Security icon is blinking. If it is blinking,
enter your password.
Contact your support representative for
repairs.
This is not a user serviceable part but has a
normal life of 3 to 5 years.
Possible Cause Possible Solution
To Next Page
Loading...
