Fujitsu Lifebook - Powering the Notebook; Connecting the Power Adapter

27
Problem
Video Problems
The application
display uses only
a portion of your
screen and is
surrounded by a
dark frame.
The Display is
dark when on
battery power.
You have
connected an
external monitor
and it does not
display any
information.
You have
connected an
external monitor
and it does not
come on.
You are running an
application that does not
support 800 x 600/1024
x 768 pixel resolution
display and display
compression is enabled.
The Power Management
utility default is set on low
brightness to conserve
power.
Your BIOS setup is
not set to enable your
external monitor.
Your external monitor is
not compatible with your
LifeBook notebook.
Your external monitor is
not properly installed.
Your operating system
software is not setup
with the correct software
driver for that device.
Display compression gives a clearer but
smaller display for applications that do not
support 800 x 600/1024 x 768 pixel resolution.
You can fi ll the screen but have less resolution
by changing your display compression setting,
(See the Video Features submenu, located
within the Advanced menu of the BIOS.)
Press [Fn] + [F7] to increase brightness or
double- click on the battery gauge and adjust
Power Control under battery settings.
Try toggling the video destination by pressing
[Fn] and [F10] together, or check your BIOS
setup and enable your external monitor. (See
the Video Features submenu, located within
the Advanced Menu of the BIOS.)
See your monitor documentation and the
External Monitor Support portions of the
Specifi cations section.
Reinstall your device.
Check your device and operating system
documentation and activate the proper driver.
Possible Cause Possible Solution