Operational Amplifier Version 1.0
Chapter 2 Amplifier Overview
■ Functions of Bits in OPAMP Control Register (OPCR)
■ OPAMP Operating Mode Settings
Notes:
•While the OPAMP is operating, modifying the settings of RES2, RES1 and RES0 is allowed,
however, do not use the output signal of the OPAMP or execute A/D conversion until OPAMP
output becomes stable.
•It is recommended to turn off the operational amplifier before modifying the settings of RES2,
RES1 and RES0.
MCU-AN-500080-E-10 - Page 8
To Next Page
Loading...