Fujitsu P2711 TE QHD - Disposal Information for Recycling; Materials Requiring Special Disposal

Page 13 of 14
Disposal information for recycling companies
These instructions are for the complete dismantling of a Fujitsu product. All materials can thereby be disposed of according to their provision in
the EC directive 2012/19/EC (Waste Electrical and Electronic Equipment (WEEE)).
Product group:
Display
Materials which must be disposed of in a special manner
Designation Remarks Quantity
Printed circuit boards
With a surface area greater than 10 cm²
Mainboard
Power board
PCB inside LCD panel
Key and sensor board
Side USB PCB board
1
1
1
1
1
Batteries Not contained 0
Components containing mercury Not contained 0
Liquid crystal displays (if applicable, together
with the casing) with a surface area greater than
100 square centimetres and backlit displays with
gas discharge lamps
> 100cm2 display: Yes, for its
display
Gas discharge lamps: No
1
Cathode ray tubes Not contained 0
Capacitors containing PCBs (PolyChlorinated
Biphenyls)
Not contained 0
Electrolytic capacitors which contain critical
substances (height > 25 mm; diameter: > 25 mm
or proportional similar volumes).
Not contained 0
External electrical cables AC adapter cable, if present 1
Gas discharge lamps Not contained 0
Chlorofluorocarbons (CFC),
hydrochlorofluorocarbons (HCFC) or
hydrofluorocarbons (HFC), hydrocarbons (HC)
Not contained 0