System Architecture
Features
PRIMEPOWER 650 and 850 are rack-mounted, mid-range servers with the following features:
1. High-performance SPARC64™ GP processors with large-capacity secondary cache
- SPARC64™ GP (675 MHz) @ 8 MB E-cache
2. Large-capacity memory subsystem
- 4 GB of memory per processor is supported.
3. SMP architecture
- The architecture supports SMP configurations.
- High-performance system bus using 540 MHz data transfer
4. High-performance I/O interface (maximums shown are with PRIMEPOWER 850)
- As basic slots, up to 16 PCI buses are provided.
- As expansion slots, up to 24 PCI buses are provided to enable flexible configuration.
- High-speed I/O is supported using 64-bit/66 MHz slots.
5. High availability function support
- Redundant configuration, hot swappable Power Supply Units (PSU), and Fan Trays
To Next Page
Loading...
