Fujitsu Primepower200 - Table 3.4 Allowed CPU Module Configurations; Adding CPU Modules

5.4 Expanding the Server Unit
5.4.2 Adding CPU modules
A total of four CPU module slots are provided on the PRIMEPOWER400 Rackmount (4U) Systemboard.
When adding CPU modules the following restrictions apply:
 Only SPARC64 GP processors can be used.
 To ensure they all operate at the same clock speed, have the same cache size and use the same CPU stepping,
the model name must be identical for all CPUs.
 CPU modules must be added according to Table 5.4 .
IMPORTANT
Operation for configurations other than those shown in Table 5.4 cannot be guaranteed.
Table 5.4 Allowed CPU Module Configurations
O - --
#0 #1 #2 #3
DDC #0, DDC #11
O -
O
O
O
O
O
O
O
-
-
O
DDC #4, DDC #5
DDC #2, DDC #3
DDC #6, DDC #7
2
3
4
CPU slot #
No. of
CPUs
DDCs to be added
(incremental)
2
4
6
8
No. of
DDCs
85