Fujitsu Primepower200 - Overview and Key Features

CHAPTER 6 PRIMEPOWER400 Rackmount (10U) Server
6.1 Overview
The following describes the key features and appearance of the PRIMEPOWER400 Rackmount (10U) Server.
Key Features
 The server unit can be configured with up to four CPUs.
 Up to 16 gigabytes of memory can be mounted.
 Ten PCI slots (3 x 33/66MHz + 7 x 33MHz) are provided.
 Up to six UltraSCSI disk drives can be built in.
 One tape unit (DDS4 DAT, 8mm or DLT) can be installed.
 A CD-ROM drive is provided as standard.
 One 100Base-TX port, two serial ports (RS-232C) and one keyboard/mouse port are provided
as standard.
 A redundant fan configuration and N+1 redundant power supply configuration are supported.
Appearance
The following illustration shows the appearance of the PRIMEPOWER400 Rackmount (10U)
Server.
CHECK LED
(Amber)
POWER LED
(Green)
Figure 6.1 PRIMEPOWER400 Rackmount (10U) Server
90