CHAPTER 9 Expansion Disk Cabinet
9.3.2 Installation specifications
Table 9.2 and Table 9.3 show the installation specifications for the Expansion Disk Cabinet.
Table 9.2 Installation Specifications of the Expansion Disk Cabinet (1/2)
Item Specification
Weight 38 kg (83.78 lb.) (max.)
Power Supply
Voltage
Frequency 50/60 Hz (+2 ~ -4%)
Max. Current 3.0 A (100V)
Leak Current
Frame Resistance
Temperature Operating
Non-operating
Humidity Operating 20 ~ 80% RH (non-condensing)
Non-operating 8 ~ 80% RH (non-condensing)
Vibration Operating 0.2 G
Non-operating 0.4 G
Noise 47 db(A) (*2)
Form Factor Pedestal
1.5 A (240V)
Single phase
AC100 ~ 120V (
±
10%)
Single phase
AC200 ~ 240V (
±
10%)
²
3.5 mA
²
100Ω
5 ~ 35
û
C (+41 ~ +95 F) (*1)
0 ~ 50
û
C (+32 ~ +122 F)
*1: If the ambient temperature exceeds 35 deg. C (95 deg. F) during operation, a warning message is
displayed. Take steps to rectify the problem immediately.
*2: The indicated noise is the mean value of the measurements obtained in an anechoic chamber with
less echoic influence. The actual noise measured at the installation site may be greater than the
indicated noise due to background noise and echoes.
172
To Next Page
Loading...
