Fujitsu Primepower200 - Expanding the Server Unit

3.4 Expanding the Server Unit
3.4 Expanding the Server Unit
CAUTION
The following operations should be performed by a service engineer, and not by
the user. Otherwise, the product may malfunction.
 Mounting/removal of optional internal units
The following optional items can be added to the PRIMEPOWER200 Rackmount (4U) Server.
 Power supply units
 CPU modules
 Memory modules
 Hard disk drives
 PCI cards
Systemboard mounting locations are as follows:
PCUPS KB RCI LANSerial-A Serial-B
DDC#3DDC#2
DDC#1DDC#0
SCF Board Only
NVRAM
PCI Slot #1
PCI Slot #2
PCI Slot #3
PCI Slot #4
PCI Slot #5
PCI Slot #6
CPU Slot #0
CPU Slot #1
#00 #01
#02 #03
#04 #05
#06 #07
#08 #09
#10 #11
#12 #13
#14 #15
Memory Module Slots
Figure 3.7 PRIMEPOWER200 Rackmount (4U) Systemboard
41