Fujitsu PRIMEQUEST 2800B3 - Page 22

System Configuration Guide
PRIMEQUEST 2800B3
Single channel 56Gbps Infiniband HCA card
MC-0JHC31 / MCX0JHC31 (LD)
- For PCI slots with Full Height / Low Profile brackets
Dual channel 56Gbps Infiniband HCA card
MC-0JHC41 / MCX0JHC41 (LD)
- For PCI slots with Full Height / Low Profile brackets
Dual channel 12Gbps SAS RAID Controller Card
MC-0JSR61 / MCX0JSR61 (LD)
- Low Profile
RAID Advanced Software Options
MC-0KLA31 / MCX0KLA31 (LD)
- License Activation Key for MegaRAID CacheCade 2.0
FBU Mount Kit for Ext. SAS RAID Card
MC-0HCK21 / MCX0HCK21 (LD)
- For mounting Flash Back-up Unit.
- 1 x Card can be mounted in the PCIe slots #0 of IOU (1Gbps) only .
Flash Back-up Unit
MC-0JFB31 / MCX0JFB31 (LD)
- Max 2 x Flash Back-up Units can be mounted per FBU Mount Kit
for Ext. SAS RAID Card.
Dual channel 12Gbps SAS RAID Controller Card
MC-0JSR62
- Full Height
RAID Advanced Software Options
MC-0KLA31 / MCX0KLA31 (LD)
- License Activation Key for MegaRAID CacheCade 2.0
FBU Mount Kit for Ext. SAS RAID Card
MC-0HCK21 / MCX0HCK21 (LD)
- For mounting Flash Back-up Unit.
- 1 x Card can be mounted in the PCIe slots #0 of IOU (1Gbps) only .
Flash Back-up Unit
MC-0JFB31 / MCX0JFB31 (LD)
- Max 2 x Flash Back-up Units can be mounted per FBU Mount Kit
for Ext. SAS RAID Card.
Dual Channel 12Gbps SAS Card
MC-0JSS31 / MCX0JSS31 (LD)
- Low Profile
Dual Channel 12Gbps SAS Card
MC-0JSS32
- Full Height
next page
10. PCI Card
Per Base Unit:
Max. 16 x PCI Cards can be mounted in 4 x I/O Units (1GbE) .
-Per I/O Unit (1GbE) : Max. 4 x PCI cards can be mounted.
-Per I/O Unit (10GbE) : Max. 3 x PCI cards can be mounted.
FUJITSU Server PRIMEQUEST 22 / 28