Fujitsu PRIMEQUEST 2800B3 - System Configuration Guide

System Configuration Guide
PRIMEQUEST 2800B3
PRIMEQUEST 2800B3 Base Unit
MCH3AC111B
- Rack mount type
- Min. 1 x System Board needs to be mounted. Max. 4 x System Boards can be mounted.
- Min. 1 x I/O Unit needs to be mounted. Max. 4 x I/O Units can be mounted.
- 1 x MMB is included.
- 4 x LAN ports per MMB
- Min. 3 x PSUs need to be mounted.
- Fan units need to be mounted in empty space of PSU/Fan bay where PSU is not mounted.
6 x PSUs and/or Fans need to be mounted in total.
- Power cords need to be ordered. The quantity is equal to the quantity of PSU.
- Rack space : 10U
System Board
2. Base Unit
RAID
カード
RAID
カード
MMB #0
PSU/
FAN #0
PSU/
FAN #1
PSU/
FAN #2
PSU/
FAN #3
PSU/
FAN #4
PSU/
FAN #5
I/O Unit #0
PCI Slot
LAN
port
I/O Unit #2
PCI Slot
LAN
port
I/O Unit #1
PCISlot
LAN
Port
I/O Unit #3
PCI Slot
LAN
Port
Disk Unit #0
HDD
RAID
Card
Disk Unit #1
HDD
RAID
Card
SB #2
CPU CPU
Memory
Memory
SB #1
CPU CPU
SB #3
CPU CPU
Memory Memory Memory Memory
SB #0
CPU CPU
Memory
Memory
RAID
Card
RAID
Card
The following options are NOT included in the Base Unit.
- System Board, CPU, Memory, I/O Unit, PSU and Power Cord
The following options are included in the Base Unit.
- 1x Management Board (MMB)
- 1x Rack Mount Kit
Supported 100BASE-TX/ 10BASE-T Maintenannce port
Supported 100BASE-TX/ 10BASE-T REMCS port
Supported
1000BASE-T/ 100BASE-TX/ 10BASE-T
User port
Automatic negotiation function Ethernet standard Interface
The Interfaces per Management Board (MMB)
FUJITSU Server PRIMEQUEST 4 / 28