FUJITSU Server PRIMEQUEST 3800E2 System Configuration Guide
July 2019, Ver.2.0
DIMM mixed installation conditions are shown in the following table.
Same symbols mean that same DIMMs can be installed which is defined in the table below.
Different symbols mean that different DIMMs can be mixed.
DIMM mixed installation condition.
0A0 0B0 0C0 0D0 0E0 0F0 0A0 0B0 0C0 0D0 0E0 0F0
0A1 0B1 0C1 0D1 0E1 0F1 0A1 0B1 0C1 0D1 0E1 0F1
□ △ 〇 ☆ ▽ ◇ ■ ▲ ● ★ ▼ ◆
♤ ♡ ♧ ♙ ♘ ♖ ♠ 💛 ☘ ♟ ♞ ♜
□ △ 〇 ☆ ▽ ◇ ■ ▲ ● ★ ▼ ◆
♤ ♡ ♧ ♙ ♘ ♖ ♠ 💛 ☘ ♟ ♞ ♜
□ △ 〇 ☆ ▽ ◇ ■ ▲ ● ★ ▼ ◆
♤ ♡ ♧ ♙ ♘ ♖ ♠ 💛 ☘ ♟ ♞ ♜
□ □ □ △ △ △ ■ ■ ■ ▲ ▲ ▲
〇 〇 〇 ☆ ☆ ☆ ● ● ● ★ ★ ★
□ □ □ □ □ □ □ □ □ □ □ □
□ □ □ □ □ □ □ □ □ □ □ □
Mixing condition shown contains installation conditions about near side and far side in DDR CH.
When RDIMM or LRDIMM other than 3DS with different rank number is populated together within a DDR channel, the
DIMM with largest rank number must be populated at far side and the DIMM with smallest rank number must be
populated at near side.
Full Mirror (Mirror Keep) /
Address Range Mirror
Full Mirror (Capacity Keep)
Memory Mixed Installation Condition
To Next Page
Loading...
