Fujitsu PRIMEQUEST 3800E2 - Page 19

FUJITSU Server PRIMEQUEST 3800E2 System Configuration Guide
Disk Unit for DMBU(Disk/MMB Unit) (DU_M) July 2019, Ver.2.0
Disk Unit for DMBU(Disk/MMB Unit) (DU_M)
MC-5HDU51 / MCX5HDU51 (LD)
- Max. 4x Disk Units per Disk/MMB Unit.
- 1x RAID Controller card is required per Disk Unit.
- Max 4x SAS HDD/SSD can be mounted per Disk Unit.
SAS RAID Controller Card (EP420i)
MC-0JSRA1 / MCX0JSRA1 (LD)
- One RAID Controller card allows mounting of 4x disk drives
such as HDD or SSD.
- 12Gbps for each disk drive. 2GB of cache memory
- RAID 0/1/1E/5/6/10 and hot spare supported
RAID Advanced Software Options
MC-0KLA51 / MCX0KLA51 (LD)
License Activation Key for CacheCade 2.0
Flash Back-up Unit
MC-0JFB61 / MCX0JFB61 (LD)
- Flash Backup Unit for RAID Controller (2GB Cache)
- Connection between I/O Unit
and Disk Unit_M
SAS RAID Controller Card (EP540i)
I/O Unit #0
Disk Unit_M#0
MC-0JSR71 / MCX0JSR71 (LD)
I/O Unit #1
Disk Unit_M#1
- One RAID Controller card allows mounting of 4x disk drives
I/O Unit #2
Disk Unit_M#2
such as HDD or SSD.
I/O Unit #3
Disk Unit_M#3
- 12Gbps for each disk drive. 4GB of cache memory
- RAID 0/1/5/6/10 and hot spare supported
- No RAID Software License required.
Flash Back-up Unit for EP5x0i
MC-0JFB41 / MCX0JFB41 (LD)
- Flash Backup Unit for RAID Controller
SAS RAID Controll Card (8GB Cache)
MC-0JSR81 / MCX0JSR81 (LD)
- One RAID Controller card allows mounting of 4x disk drives
such as HDD or SSD.
- 12Gbps for each disk drive. 8GB of cache memory
- RAID 0/1/5/6/10 and hot spare supported
- No RAID Software License required.
Flash Back-up Unit for EP5x0i
MC-0JFB41 / MCX0JFB41 (LD)
- Flash Backup Unit for RAID Controller
HDD
I/O Unit
Disk Unit
PSU_M
#1
PSU_M
#0
I/O Unit
#1
I/O Unit #0
LAN
port
PCI Slots
x4
MMB #0
Disk
Unit_M
#1
PSU#3
PSU#2PSU#1
PSU#0
MMB #1
Disk Unit #0
HDD/SSD
RAID
Card
FBU
SB #0
Memory
x12 slots
CPU
Memory
x12 slots
CPU
SB #1
Disk Unit #1
Disk Unit_M #0
HDD/SSD
RAID
Card
FBU
Disk
Unit_M
#2
Disk
Unit_M
#3
I/O Unit
#2
I/O Unit
#3
SB #2
SB #3
-
Max. 4 Disk Units can be mounted on the Disk/MMB Unit
-
In order to mount Disk Unit #1, #2 and #3, I/O Unit #1, #2 and #3 is
required respectively.
Disk Unit for DMBU(Disk/MMB Unit) (DU_M)
19 of 42