46 Operating Manual BX900 S1
Installing the hardware
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-4949-006.fm
Figure 4: Attaching the left carrier rail
Ê Position the carrier rail in the support bracket (insert knob) - see (1).
I For the Japanese market:
There is no support bracket. Please position the support system
directly on the support upright.
Ê Fasten the carrier rail at the lower end of the support bracket using three
centering screws (2).
Ê Position the carrier rail in the front left support upright.
Ê Fasten the carrier rail to the front support upright (3) using three M5 screws
including plugwashers.
Ê Repeat the operation for the right carrier rail. This rail does not require a
support bracket.
/
0
1
To Next Page
Loading...
