BX900 S1 Operating Manual 81
Troubleshooting and tips
7.8 Incorrect date and time
Ê Set the time and/or date in the operating system or in the BIOS setup for the
relevant server blade.
I If the time and date are repeatedly wrong when you switch on your
server blade, the lithium battery is flat. Change the battery as described
in the manual for the relevant server blade.
7.9 Server blade does not boot
The server blade does not boot after a defective hard disk drive was
replaced
Incorrect SCSI configuration (onboard SCSI HostRAID controller)
Ê In the SCSI configuration menu, check the settings for the hard disk drives
(SCSI Device Configuration) and the settings under Advanced Configuration
Options.
To Next Page
Loading...
