86 Operating Manual BX900 S1
Hot-plug components
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-4953-006.fm
Figure 21: Locking the BX920 S1 server blade
Ê Push the release lever up until it clicks into place under the locking lever (1).
Removal is carried out in reverse order.
Installing a single height / double width Blade
The following describes how to install a BX960 S1 server blade. This server
blade occupies 2 bays one upon the other in the BX900 S1 system unit.
1
To Next Page
Loading...
