88 Operating Manual BX900 S1
Hot-plug components
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-4953-006.fm
Figure 23: Locking the BX960 S1 server blade
Ê Push the release lever up until it clicks into place under the locking lever (1).
Removal is carried out in reverse order.
Installing a dummy server blade module
Any unused server blade slots must be fitted with dummy modules to comply
with EMC regulations for the system and to ensure sufficient cooling of the
components.
1
To Next Page
Loading...
