© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message Stack Firmware Synchronization Start for unit %d
Explanation The Firmware synchronization is started for a unit
Recommended Action DO NOT remove this unit while the Firmware updating
Severity Level 2
Error Message Stack Firmware Synchronization Failed for unit <unit-id>. Use
archive copy-sw command to synchronize the image manually.
Explanation The Firmware synchronization is failed for a unit
Recommended Action Please use archive copy-sw command to synchronize the image
manually.
Severity Level 6
Error Message Stack Firmware Synchronization Finished for unit <unit-id>
Explanation The Firmware synchronization is finished
Recommended Action The Firmware synchronization for this unit is finished
Severity Level 6
Error Message Stack MAC address is changed to that of current stack master.
Explanation The stack MAC address is changed to the one of current stack
master.
Recommended Action To use persistent stack MAC address, use ‘stack-mac persistent
timer 0’ command.
Severity Level 6
Error Message Stack MAC Address owner rejoins the stack, stopping stack-mac
persistent timer
Explanation The stack-mac persistent timer is stopped when the stack MAC
address owner rejoins the stack. The stack MAC address is kept
using without changing to the one of current stack master.
Recommended Action Checking if the stack MAC address is remaining unchanged.
To Next Page
Loading...
