Fujitsu PRIMERGY BX900 - Page 177

© 2011 Fujitsu Technology Solutions
Error Message Error! Use "lldp notification-interval <interval> " to limit how
frequently LLDP remote data change notifications are sent.
Explanation User input incomplete command .
Recommended Action Use "lldp notification-interval <interval> "
Error Message Error! Enter a value in the range <5 - 3600> seconds.
Explanation User input an value out of range <5-3600> seconds for lldp
notification-interval.
Recommended Action Enter a value in the range <5 - 3600> seconds.
Error Message Error! Use"lldp notification" to enable remote data change
notifications.
Explanation User attempt to configure lldp notification on invalid interfaces.
Recommended Action Make sure the interface is not port-channel interface.
Error Message Error! Use "lldp transmit-tlv [sys-desc] [sys-name] [sys-cap]
[port-desc] [org-spec]" to transmit LLDP optional TLV(s) on the
interface.
Explanation User input incomplete command .
Recommended Action Use "lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
[org-spec]" to transmit LLDP optional TLV(s) on the interface.
Error Message Error! Interface out of range.
Explanation User attempt to configure LLDP transmit-tlv on invalid interfaces.
Recommended Action Make sure the interface is not port-channel interface.
Error Message Error! Use "lldp timers [interval <transmit-interval>] [hold
<hold-multiplier>] [reinit <reinit-delay>]" to configure the LLDP
global timer values.
Explanation User input incomplete command .
Recommended Action Use "lldp timers [interval <transmit-interval>] [hold
<hold-multiplier>] [reinit <reinit-delay>]" to configure the LLDP
global timer values.
Error Message Error! Enter a value in the range <2 - 10>.
Explanation User input incomplete command or value out of range <2-10>.
Recommended Action Enter a value in the range <2 - 10> for lldp timers hold.