© 2011 Fujitsu Technology Solutions
Error Message Incorrect input! Use 'set mld maxresponse <vlanId>
<max-response-time>'
Explanation User input incomplete command.
Recommended Action Use 'set mld maxresponse <vlanId> <max-response-time>'.
Error Message Incorrect input! Use 'no set mld maxresponse <vlanId>'
Explanation User input incomplete command.
Recommended Action Use ' no set mld maxresponse <vlanId>'.
Error Message Incorrect input! Use 'set mld mcrtrexpiretime <vlanId>
<mcrouter-expiry-time>'
Explanation User input incomplete command.
Recommended Action Use 'set mld mcrtrexpiretime <vlanId> <mcrouter-expiry-time>'.
Error Message Incorrect input! Use 'no set mld mcrtrexpiretime <vlanId>'
Explanation User input incomplete command.
Recommended Action Use ' no set mld mcrtrexpiretime <vlanId>'.
Error Message Maximum Response Time should be lesser than the Group
Membership Interval for the VLAN.
Explanation User input invalid value for Maximum Response Time.
Recommended Action The value of Maximum Response Time must be lesser than the
Group Membership Interval for that VLAN. Use 'set mld
maxresponse <vlanId> <max-response-time>'.
Error Message Group Membership Interval should be Greater than the
Maximum Response Time for the VLAN.
Explanation User input invalid value for the Group Membership Interval.
Recommended Action The value of the Group Membership Interval must be greater
than the Response Time for that VLAN.
Use ' set mld groupmembership-interval <vlanId>
<group-membership-interval>'.
Error Message ERROR: Group Membership Interval must be greater than the
Maximum Response Time.
Explanation User input invalid value of the Group Membership Interval.
Recommended Action Group Membership Interval must be greater than the Maximum
Response Time.
Use ' ipv6 mld snooping groupmembershipinterval <2-3600>'.
To Next Page
Loading...
