Fujitsu PRIMERGY BX900 - Page 23

© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message osapiMalloc (SIZE) failed.
Explanation Memory allocation is failed.
Recommended Action The system is failed to init.
Severity Level 6
Error Message Failed to read config file FILENAME data SIZE
Explanation Fail to converts uncombined configuration files to combined
configuration files.
Recommended Action The configuration file is corrupted instead of the factory default.
Severity Level 6
Error Message sysapiCfgFileMapInterfaces failed.
Explanation Fail to create mapping for interfaces from current release to
subsequence release.
Recommended Action The system is failed to init.
Severity Level 6
Error Message cfgFileCount > SYSAPI_MAX_FILE_ENTRIES
Explanation Configuration file too much.
Recommended Action The system configuration file exceed to the system limitation.
Severity Level 6
Error Message sysapiCfgFileIndexGet (FILENAME) failed.
Explanation Configuration file index gets fail.
Recommended Action The configuration file is corrupted instead of the factory default.
Severity Level 6
Error Message Invalid index INDEX MAX = MAXINDEX
Explanation Configuration file index gets fail.
Recommended Action The configuration file is corrupted instead of the factory default.
Severity Level 6
Error Message Invalid slot SLOT or port PORT
Explanation Invalid slot or port value
Recommended Action The configuration file is corrupted instead of the factory default.