Fujitsu PRIMERGY BX900 - Page 249

© 2011 Fujitsu Technology Solutions
Error Message Incorrect input! Use 'lacp <uplinkSetName>'.
Explanation Incomplete command for this function.
Recommended Action Use complete command 'lacp <uplinkSetName>'.
Error Message Incorrect input! Use 'no lacp <uplinkSetName>'.
Explanation Incomplete command for this function.
Recommended Action Use complete command 'no lacp <uplinkSetName>'.
Error Message Incorrect input! Use 'show lacp [<uplinkSetName>]'.
Explanation Incomplete command for this function.
Recommended Action Use complete command 'show lacp [<uplinkSetName>]'.
Error Message Incorrect input! Use 'show lacp interface {<unit/slot/port> | all}'.
Explanation Incomplete command for this function.
Recommended Action Use complete command ' show lacp interface {<unit/slot/port> |
all}'.
Error Message ERROR: Invalid interface - %s
Explanation User try to configure or display information of an interface, but
the interface not support this function.
Recommended Action Use the correct interface for this function.