© 2011 Fujitsu Technology Solutions
This section contains Port Config module messages.
Error Message Error: Value is out of range for Sequence Number. The valid
range is 1 to 4294967295.
Explanation The value of ACL Sequence Number is out of range.
Recommended Action The range of ACL Sequence Number is 1 to 4294967295.
Error Message No IP ACLs are currently configured.
Explanation User try to apply IP ACLs to interfaces, but there are no IP ACLs
configured in the system.
Recommended Action To create the IP ACLs first, and then apply it to the interfaces.
Error Message No MAC ACLs are currently configured.
Explanation User try to apply the MAC ACLs to interfaces, but there are no
MAC ACLs configured in the system.
Recommended Action To create the MAC ACLs first, and then apply it to interfaces.
To Next Page
Loading...
