© 2011 Fujitsu Technology Solutions
4.4.8 Secure HTTP
This section contains Secure HTTP module messages.
Error Message Error: Failed to set TLS Version 1 Mode and SSL Version 3
Mode. Both these should not be simultaneously disabled.
Explanation User try to disable TLS Version 1 and SSL Version 3 at the same
time, but it is failed.
Recommended Action TLS Version 1 or SSL Version 3 could not be disabled at the
same time.
Error Message Error: HTTPS Port format is invalid.
Explanation User try to configure the HTTPS port with non-numeric
characters.
Recommended Action Use numeric characters for HTTPS port.
Error Message Error: Value (<value>) is out of range for HTTPS Port. The valid
range is 1 to 65535.
Explanation The value of HTTPS is out of range.
Recommended Action The range of HTTPS is 1 to 65535.
Error Message Error: Failed to set port number.
Explanation User try to configure the HTTPS port, but the port number is
already configured by other protocol in the system.
Recommended Action Use other port number for HTTPS port.
Error Message Error! HTTPS Soft Timeout format is invalid.
Explanation User try to configure HTTPS Soft Timeout with non-numeric
characters.
Recommended Action Use numberic characters for HTTPS Soft Timeout.
Error Message Error! Value (<value>) is out of range for HTTPS Soft Timeout.
The valid range is 1 to 60.
Explanation The value of HTTPS Soft Timeout is out of range.
Recommended Action The range fo HTTPS Soft Timeout is 1 to 60.
Error Message Error! HTTPS Hard Timeout format is invalid.
Explanation User try to configure HTTPS Hard Timeout with non-numeric
characters.
Recommended Action Use numeric characters to configure HTTPS Hard Timeout.
To Next Page
Loading...
