EasyManua.ls Logo

Fujitsu PRIMERGY BX900 - Page 419

Fujitsu PRIMERGY BX900
430 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2011 Fujitsu Technology Solutions
Error Message No Class Match Criteria selected.
Explanation User try to add a Match Criteria of the DiffServ Class Rule , but
does not select any item of the ‘Class Match Selector’ field.
Recommended Action User should select a criteria and click ‘Add Match Criteria’
button.
Error Message User Input Error: Invalid IP Address.
Explanation User try to configure IP Address of the DiffServ Class Match
Criteria, but the IP Address is out of range.
Recommended Action Use the numeric character 1 to 255 in form x.x.x.x to set IP
Address for DiffServ Class Match Criteria.
Error Message User Input Error: Invalid Subnet Mask.
Explanation User try to configure IP Subnet Mask of the DiffServ Class Match
Criteria, but the IP Subnet Mask is out of range.
Recommended Action Use the numeric character 1 to 255 in form x.x.x.x to set IP
Subnet Mask with contiguous ones and no longer than 30 bits.
Error Message User Input Error: Invalid Layer 4 Port Range.
Explanation User try to configure DiffServ Class Match Layer 4 Port with
non-numeric characters or the value is out of range.
Recommended Action Use the numeric characters for DiffServ Class Match Layer 4
Port and the range of it is 0 to 65535.
Error Message User Input Error: Invalid MAC Address.
Explanation User try to configure MAC Address of the DiffServ Class Match
Criteria, but the MAC Address is out of range.
Recommended Action Use the alphanumeric character 00 to FF in form
xx:xx:xx:xx:xx:xx to set MAC Address for DiffServ Class Match
Criteria.
Error Message User Input Error: Invalid Mac Address Mask.
Explanation User try to configure Mac Address Mask of the DiffServ Class
Match Criteria, but the Mac Address Mask is out of range.
Recommended Action Use the alphanumeric character 00 to FF in form
xx:xx:xx:xx:xx:xx to set Mac Address Mask for DiffServ Class
Match Criteria.
Error Message Error: Ethertype Value out of range.
Explanation The value of DiffServ Class Match Ethertype is out of range.
Recommended Action The range of DiffServ Class Match Ethertype is 600 to ffff hex
value.

Table of Contents

Other manuals for Fujitsu PRIMERGY BX900

Related product manuals