Fujitsu PRIMERGY BX900 - Page 422

© 2011 Fujitsu Technology Solutions
Error Message Could not create the policy attribute.
Explanation User try to set the DiffServ policy attribute, but the Class name is
not associated with the policy.
Recommended Action Refresh the WEB page, and select the Class name again.
Error Message Could not set the queue id.
Explanation User try to configure the queue id of Diffserv policy, but the Class
name is not associated with the policy.
Recommended Action Refresh the WEB page, and select the Class name again.
Error Message Could not set the marking COS value.
Explanation User try to configure the marking CoS of Diffserv policy, but the
Class name is not associated with the policy.
Recommended Action Refresh the WEB page, and select the Class name again.
Error Message Could not set the marking IP DSCP value.
Explanation User try to configure the IP DSCP of Diffserv policy, but the
Class name is not associated with the policy.
Recommended Action Refresh the WEB page, and select the Class name again.
Error Message Could not set the marking IP Precedence value.
Explanation User try to configure the IP Precedence of Diffserv policy, but the
Class name is not associated with the policy.
Recommended Action Refresh the WEB page, and select the Class name again.
Error Message No more attributes can be specified.
Explanation User try to configure the Police Simple attribute of Diffserv
policy, but the Class name is not associated with the policy.
Recommended Action Refresh the WEB page, and select the Class name again.
Error Message Could not set the policing attribute Color Conform Class.
Explanation User try to configure the policing attribute Color Conform Class,
but the Class name is not associated with the policy.
Recommended Action Refresh the WEB page, and select the Class name again.
Error Message Could not set the policing conform action value.
Explanation User try to configure the policing conform action, but the Class
name is not associated with the policy.
Recommended Action Refresh the WEB page, and select the Class name again.