Fujitsu PRIMERGY BX900 - Page 43

© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message diffServServiceDelete: unable to delete Policy Perf Table row
for intf <intIfNum>, dir <ifDirection>, policy index <policyIndex
Explanation unable to delete Policy Perf Table row
Recommended Action The poicy perf table row is not matched.
Severity Level 6
Error Message diffServServiceObjectSet: unable to delete Policy Perf Table
row for intf <intIfNum>, dir <ifDirection>, policy index
<prevPolicyIndex>
Explanation unable to delete Policy Perf Table row
Recommended Action The poicy perf table is not deleted.
Severity Level 6
Error Message diffServServiceObjectSet: unable to create Policy Perf Table
row for intf <intIfNum>, dir <ifDirection>, policy index
<prevPolicyIndex>
Explanation unable to create Policy Perf Table row
Recommended Action The poicy perf is failed to create
Severity Level 6
Error Message diffServServiceObjectSet: attempt to destroy the row failed
Explanation attempt to destroy the row failed
Recommended Action The service object is failed to destroy.
Severity Level 6
Error Message diffServStandardMibInit: Unable to create draft MIB semaphore
Explanation Unable to create draft MIB semaphore
Recommended Action The Diffserv is failed to create.
Severity Level 6
Error Message dsTraceModeApply: Unable to apply DiffServ trace mode
(mode), handle=<diffServTraceHandle>
Explanation Unable to apply DiffServ trace mode
Recommended Action The Apply trace mode is invalid.
Severity Level 6
Error Message Error while building contents of config
Explanation Error while building contents of config
Recommended Action The config is built for error