Fujitsu PRIMERGY BX900 - Page 94

© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message Error on call to policyMapIntfIsConfigEntryGet routine outside
the EXECUTE state
Explanation Error on call to policyMapIntfIsConfigEntryGet routine outside
the EXECUTE state
Recommended Action The storm control config file is corrupt instead of the factory
default.
Severity Level 6
Error Message policyIntfDetach: error returned from
policyIntfFlowCtrlModeApply() setting intIfNum=<intIfNum> to
mode=0
Explanation Failure setting the flow control for an interface
Recommended Action The interface number need to be checked available by the
system.
Severity Level 6
Error Message policyIntfDetach: error returned from
policyIntfBcastCtrlModeApply() setting intIfNum=<intIfNum> to
mode=0
Explanation Failure setting the broadcast mode for an interface
Recommended Action The interface number need to be checked available by the
system.
Severity Level 6
Error Message policyIntfDetach: error returned from
policyIntfBcastCtrlLimitApply() for intIfNum=<intIfNum>
Explanation Failure setting the broadcast rate limiting for an interface
Recommended Action The interface number need to be checked available by the
system.
Severity Level 6
Error Message policyIntfDetach: error returned from
policyIntfMcastCtrlModeApply() setting intIfNum=<intIfNum> to
mode=0
Explanation Failure setting the multicast mode for an interface
Recommended Action The interface number need to be checked available by the
system.
Severity Level 6
Error Message policyIntfDetach: error returned from
policyIntfMcastCtrlLimitApply() for intIfNum=<intIfNum>
Explanation Failure setting the multicast rate limiting for an interface
Recommended Action The interface number need to be checked available by the
system.