Fujitsu PRIMERGY BX900 - Page 95

© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message policyIntfDetach: error returned from
policyIntfDlfCtrlModeApply() setting intIfNum=<intIfNum> to
mode=0
Explanation Failure setting the unicast mode for an interface
Recommended Action The interface number need to be checked available by the
system.
Severity Level 6
Error Message policyIntfDetach: error returned from policyIntfDlfCtrlLimitApply()
for intIfNum=<intIfNum>
Explanation Failure setting the unicast mode for an interface
Recommended Action The interface number need to be checked available by the
system.
Severity Level 6
Error Message policyIntfDetach: error returned from policyIntfDlfCtrlLimitApply()
for intIfNum=<intIfNum>
Explanation Failure setting the unicast rate limiting for an interface
Recommended Action The interface number need to be checked available by the
system.
Severity Level 6
Error Message policyIntfChangeCallback: Received an interface event callback
while not in EXECUTE state.
Explanation Failure setting the unicast rate limiting for an interface
Recommended Action The storm control module is failed to init.
Severity Level 6
Error Message Failure setting interface <intIfNum> multicast storm mode to
<mode>
Explanation Failure setting the multicast mode for an interface
Recommended Action The interface number need to be checked available by the
system.
Severity Level 6
Error Message Failure setting interface <intIfNum> unicast storm mode to
<mode>
Explanation Failure setting the unicast mode for an interface
Recommended Action The interface number needs to be checked available by the
system.