© 2011 Fujitsu Technology Solutions
177
Timeout - The time (in seconds) remaining before the sampler is released and stops sampling.
Maximum Datagram Size - The maximum number of data bytes that can be sent in a single sample
datagram.
Address - The IP address of the sFlow collector.
Port - The destination port for sFlow datagrams.
Datagram Version - The version of sFlow datagrams that should be sent.
Command Buttons
Apply - Send the updated data to the switch and cause the changes to take effect on the switch.
Refresh - Refresh the data on the screen with present state of data in the switch.
To Next Page
Loading...
