© 2011 Fujitsu Technology Solutions
279
EAP Request Frames Transmitted - This displays the number of EAP request frames (other than
request/identity frames) that have been transmitted by this authenticator.
Invalid EAPOL Frames Received - This displays the number of EAPOL frames that have been
received by this authenticator in which the frame type is not recognized.
EAP Length Error Frames Received - This displays the number of EAPOL frames that have been
received by this authenticator in which the frame type is not recognized.
Command Buttons
Refresh - Update the information on the page.
Clear All - This button resets all statistics for all ports to 0. There is no confirmation prompt. When
this button is pressed, the stats are immediately cleared.
Clear - This button resets the statistics for the selected port. There is no confirmation prompt. When
this button is pressed, the stats are immediately cleared.
9.4.1.6 Login
Figure : Port Access Control Login
Selection Criteria
Users - Selects the user name that will use the selected login list for 802.1x port security.
Configurable Data
Login - Selects the login to apply to the specified user. All configured logins are displayed.
Command Buttons
Apply - Send the updated screen to the switch and cause the changes to take effect on the switch
but these changes will not be retained across a power cycle unless a save is performed.
Refresh - Update the information on the page.
To Next Page
Loading...
