Fujitsu PRIMERGY BX900 - Page 419

© 2011 Fujitsu Technology Solutions
417
10.4.4.5 bridge-ext gvrp
This command enables GVRP. The default value is disabled.
Syntax
bridge-ext gvrp
no bridge-ext gvrp
no - This command disables GVRP.
i
GVRP can’t be enabled as the VTP function is enabled.
Default Setting
Disabled
Command Mode
Global Config
10.4.4.6 bridge-ext gmrp
This command enables GARP Multicast Registration Protocol (GMRP) on the system. The default value
is disabled.
Syntax
bridge-ext gmrp
no bridge-ext gmrp
no - This command disables GARP Multicast Registration Protocol (GMRP) on the system.
Default Setting
Disabled
Command Mode
Global Config