© 2011 Fujitsu Technology Solutions
445
10.4.7.1.2 Display IGMP snooping querier vlan info
This command display IGMP snooping querier global information on the system.
Syntax
show ip igmp snooping querier vlan <1-4093>
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
IGMP Snooping Vlan Mode: Display the administrative mode for IGMP Snooping for the switch.
Querier Election Participation Mode: Displays the querier election participate mode on the VLAN.
When this mode is disabled, up on seeing a query of the same version in the vlan, the snooping
querier move to non querier state. Only when this mode is enabled, the snooping querier will
participate in querier election where in the least ip address will win the querier election and operates
as the querier in that VLAN. The other querier moves to non-querier state
Querier Vlan Address: Displays the Snooping Querier Address to be used as source address in
periodic IGMP queries sent on the specified VLAN.
Operational State: Specifies the operational state of the IGMP Snooping Querier on a VLAN.
Operational Version: Displays the operational IGMP protocol version of the querier.
To Next Page
Loading...
