Fujitsu PRIMERGY BX900 - Page 450

© 2011 Fujitsu Technology Solutions
448
10.4.7.2.3 Set IGMP snooping querier query-interval
The user can go to the CLI Global Configuration Mode to set IGMP snooping querier query interval, use
the ip igmp snooping querier query-interval <1-1800> global configuration command. Use the no ip
igmp snooping querier query-interval return to default value zero.
Syntax
ip igmp snooping querier query-interval <1-1800>
no ip igmp snooping querier query-interval
Default Setting
0
Command Mode
Global Config
10.4.7.2.4 Set IGMP snooping querier querier-expiry-interval
The user can go to the CLI Global Configuration Mode to set IGMP snooping querier querier expiry
interval, use the ip igmp snooping querier querier-expiry-interval <60-300> global configuration
command. Use the no ip igmp snooping querier query-interval return to default value zero.
Syntax
ip igmp snooping querier querier-expiry-interval <60-300>
no ip igmp snooping querier querier-expiry-interval
Default Setting
0
Command Mode
Global Config