Fujitsu PRIMERGY BX900 - Page 528

© 2011 Fujitsu Technology Solutions
526
10.6.5.5 snmp-server sysname
This command sets the name of the switch. The range for name is from 1 to 31 alphanumeric
characters.
Syntax
snmp-server sysname <name>
<name> - Range is from 1 to 31 alphanumeric characters.
Default Setting
None
Command Mode
Global Config
10.6.5.6 snmp-server location
This command sets the physical location of the switch. The range for name is from 1 to 31 alphanumeric
characters.
Syntax
snmp-server location <loc>
<loc> - range is from 1 to 31 alphanumeric characters.
Default Setting
None
Command Mode
Global Config