Fujitsu PRIMERGY BX900 - Page 535

© 2011 Fujitsu Technology Solutions
533
10.6.5.12 snmp-server enable informs
This command enables the snmp informs for SNMPv2 and SNMPv3.
Syntax
snmp-server enable informs
no snmp-server enable informs
no - This command disables the sending of snmp informs.
Default Setting
Disabled
Command Mode
Global Config
10.6.5.13 snmp-server inform retries
This command set how many times to resend the inform.
Syntax
snmp-server inform retries
no snmp-server inform retries
no - This command restore the default setting of snmp inform retires value
Default Setting
3
Command Mode
Global Config