Fujitsu PRIMERGY BX900 - Page 622

© 2011 Fujitsu Technology Solutions
620
10.9.1.17 clear port-security dynamic
This command clears all port-security dynamic information.
Syntax
clear port-security dynamic {address <mac-addr> | interface <slot/port>}
address - Clear dynamic address by MAC address.
<mac-addr> - MAC address.
interface - Clear dynamic address by interface.
<slot/port> - is the desired interface number.
Default Setting
None
Command Mode
Privileged Exec
10.9.1.18 clear ip filter
This command is used to clear all ip filter entries.
Syntax
clear ip filter
Default Setting
None
Command Mode
Privileged Exec