Fujitsu PRIMERGY BX900 - Page 722

© 2011 Fujitsu Technology Solutions
720
This command is used to configure the TACACS server’s service port.
Syntax
port [<0-65535>]
If this command without any parameter, the port value will be reset to default value.
<0-65535> - TACACS service port (Range: 0 to 65535).
Default Setting
49
Command Mode
TACACS mode
This command is used to configure the TACACS server’s priority.
Syntax
Priority [<0-65535>]
If this command without any parameter, the priority value will be reset to default value.
<0-65535> - TACACS service priority (Range: 0 to 65535).
Default Setting
0
Command Mode
TACACS mode