Fujitsu PRIMERGY BX900 - Page 726

© 2011 Fujitsu Technology Solutions
724
10.16.6.3 port-security max-static
This command sets the maximum number of statically locked MAC addresses allowed on a specific port.
Syntax
port-security max-static [<0-20>]
no port-security max-static
no - This command resets the maximum number of statically locked MAC addresses allowed on a
specific port to its default value.
Default Setting
20
Command Mode
Interface Config
10.16.6.4 port-security mac-address
This command adds a MAC address to the list of statically locked MAC addresses.
Syntax
port-security mac-address <mac-addr> <1-4094>
no port-security mac-address <mac-addr> <1-4094>
<1-4094> - VLAN ID
<mac-addr> - static mac address
no - This command removes a MAC address from the list of statically locked MAC addresses
Default Setting
None
Command Mode
Interface Config