Fujitsu PRIMERGY BX900 - Page 752

© 2011 Fujitsu Technology Solutions
750
10.17.2.19 match vlan
This command adds to the specified class definition a match condition based on the value of the layer 2
VLAN Identifier field (the only tag in a single tagged packet or the first or outer tag of a double VLAN
tagged packet). The VLAN ID is an integer from 0 to 4093.
NOTE: This command is not available on the Broadcom 5630x platform.
Syntax
match vlan <0-4093>
Default Setting
None
Command Mode
Class-Map Config