BX920 S2 Operating Manual 61
Advanced menu
LAN Controller n
Specifies (for each controller) whether a port is activated by onboard LAN
Controller n, and if so, which port.
Disabled
No port is activated.
Port 1
PORT 1 is activated.
Port 1 & 2
Both ports are activated.
Port n Remote Boot
Specifies whether onboard LAN n OPROM is active during the
POST.
Disabled
The function is deactivated.
PXE
PXE is activated.
iSCSI
iSCSI is activated.
I The "Port 1 Remote Boot" item does not appear if "LAN
Controller n" is set to Disabled.
The "LAN Controller 1/Port 1 Remote Boot" item is usually
set to PXE.
The "Port 2 Remote Boot" item is only displayed if "LAN
Controller n" is set to Port 1&2.
To Next Page
Loading...
