Fujitsu PRIMERGY LTO3 - Specifications; Technical Specifications; Operating and Installation Conditions

84
8
Specifications
This chapter describes the specifications for this product.
Specifications
Installation
See "1.1 Checking the Installation Environment" (Jpg.59)
Item Functions and Specifications Comment
Product name Tape Drive LTO3 Ultrium3 400GB
Product ID PG-LT301
PGBLT301
Data memory
capacity (no
compression)
400GB
(*)
(For Ultrium3 data cartridge)
200GB
(*)
(For Ultrium2 data cartridge)
Only read is available
for Ultrium1 data
cartridge.
Data transfer speed
(no compression)
Maximum 80MB/s (1MB = 1000 × 1000
bytes conversion)
Maximum 76.3MB/s (1MB = 1024 × 1024
bytes conversion)
When using Ultrium3
data cartridge
Data format Ultrium2 or Ultrium3 format Depending on the data
cartridge to be used
Interface Ultra 320 SCSI
Weight 2.24kg
Power consumption Maximum 51W (Average 31W)
Heat dissipation Maximum 183.6 kJ/h (Average 111.6kJ/h)
Maximum wet-bulb
temperature
26 °C
*:1GB = 1000
× 1000 × 1000 bytes conversion
Item Installation conditions
Temperature Operating 10 - 35°
C
Resting -5 - 55°C
Humidity Operating/
Resting
20%RH - 80%RH (non-condensing)
Temperature ramp Operating/
Resting
Below 15 °
C/hr (non-condensing)
Dust Below 0.15mg/m
3